This study proposes a model predictive path integral (MPPI) control method that combines adaptive covariance adjustment with low-pass perturbation filtering for the pose control of a robotic manipulator. The proposed method updates the sampling covariance according to the position and orientation errors of the tool center point, which allows a large sampling range during the approach phase and reduces the perturbation magnitude near the target pose. The sampled perturbation sequences are then passed through a low-pass filter before rollout evaluation, and the nominal control sequence is updated using the weighted sum of the filtered perturbations. This structure adaptively regulates the sampling range while reducing abrupt temporal variations in the sampled perturbation sequences. Numerical simulations were conducted on a 6-DoF robotic manipulator under a sequential target-pose scenario with five random seeds. The proposed MPPI method reached the final target-hold condition at 4.10 ± 0.08 s and maintained root-mean-square (RMS) position and orientation errors of 0.47 ± 0.12 mm and 0.05 ± 0.01°, respectively, with an RMS input variation of 0.02 ± 0.001 rad/s. These results indicate that the proposed method can maintain fast target-approach performance while improving near-goal stability and input smoothness in robotic manipulator pose control.
Large-scale surface-following tasks require mobile manipulators when the work surface exceeds the workspace of a fixedbase manipulator. Base placement must consider not only inverse kinematic reachability but also collision feasibility and joint-space continuity along the task-point sequence. This paper proposes a grid-based base placement framework for these tasks. Task points and target poses are generated from a stereolithography (STL) mesh. For each predefined base candidate, inverse kinematics and collision checks are performed, and feasible task points and their corresponding joint solutions are stored for base assignment. Joint-space discontinuity is evaluated from joint variations between adjacent task points and incorporated into the base selection cost together with the number of base changes and planar travel distance. MATLAB simulations were conducted on a vehicle roof model. Of 885 task points, 853 had collision-free inverse kinematic solutions across the predefined set of 35 base candidates, and the proposed method assigned all 853 feasible points. Compared with a collision-aware baseline method, the proposed method reduced the number of joint discontinuities from 1 to 0, the maximum joint variation from 3.071 to 0.482 rad, the number of base changes from 22 to 9, and the planar base travel distance from 13.60 to 3.54 m.
Manipulator-based machine tending is a key automation technology in computer numerical control (CNC) machining, and mobile-base configurations are increasingly adopted to enable flexible reconfiguration in high-mix, low-volume manufacturing environments. However, once the robot base is relocated, the previously taught trajectory is no longer valid, and manual reteaching is required, which is time-consuming, labor-intensive, and highly dependent on operator skill. This paper proposes a marker-based machine tending method that combines multi-marker Perspective-n-Point (PnP) pose estimation with Iterative Closest Point (ICP) registration in a two-step calibration. In the first step, PnP is used to move the robot to the pre-stored reference pose. In the second step, ICP is applied to the point cloud data obtained at the current robot pose and the pre-stored point cloud data to estimate the change in the robot base pose with respect to the CNC machine. Based on this estimate, the robot can resume its task after base relocation. Validation in a CNC lathe machine tending environment showed that, compared with conventional marker-only calibration, the position repeatability measured by a laser tracker improved from 2.658 to 1.795 mm and the machine tending success rate increased from 47% to 93%, confirming the effectiveness of the proposed method.
Due to the high risks of manual labor in the steel industry, there is a growing demand for robot-based solutions to replace traditional manpower. Steel companies aim to reduce on-site personnel, minimize accidents, and enhance productivity. This study develops a robotic system to monitor conveyors in ironmaking and detect potential bearing failures. Rollers on belt conveyors contain bearings that emit abnormal noise when worn or damaged. Traditional manual inspection requires workers to approach each roller and listen directly, posing safety risks and inefficiencies. The proposed system detects faulty bearings more quickly and accurately by localizing abnormal sounds. The system comprises a manipulator with a microphone on its end-effector. The microphone collects sound along the conveyor as the manipulator moves to detect noise sources. Once an abnormal bearing is located, faster and more accurate maintenance becomes possible. This robotbased inspection method improves safety, inspection speed, and productivity.
This paper presents an advanced robotic automation framework that combines an impedance-based compliance controller with an imitation learning network for high-precision peg-in-hole assembly. The framework is characterized by three key features. First, it employs an impedance-based compliance controller to ensure stable contact. This approach enables the robot to adapt flexibly to external contact forces, functioning like a spring-damper system to prevent potential damage. Second, domain randomization is applied to both geometric and visual properties within a high-fidelity simulation environment. This strategy effectively narrows the reality gap, enhancing robustness against environmental uncertainties and visual disturbances. Third, the framework utilizes an action-chunking-transformer (ACT) network to predict precise action sequences based on multimodal data, reducing compounding errors in trajectory generation and improving assembly success rates. Each feature is supported by specific advancements, such as real-time force feedback integration, diverse simulation scenario generation, and multimodal sensor fusion. Extensive experiments conducted in various unseen environments demonstrate the framework's effectiveness, confirming its suitability for complex assembly tasks that require high adaptability and precision under diverse conditions.
This paper presents a tiltable cable-suspended aerial manipulation (SAM) system designed to improve the utility of aerial manipulators in industrial settings. Although drone-robot arm systems have shown promise, suspended configurations encounter notable stability challenges, particularly during inclined operations. To tackle these challenges, we performed simulation-based analyses focusing on the system's kinematics, dynamic response, and thrust requirements under tilted conditions. We utilized Monte Carlo sampling and forward kinematics to assess the workspace and manipulability. The findings indicated that each propeller needs to generate over 32 N of thrust to maintain stable control. Additionally, simulation experiments showed that the system can uphold its attitude and execute end-effector motions effectively, even in the presence of disturbances. This study establishes a foundational verification step toward developing a physical SAM system capable of safe and robust operation in inclined scenarios.
Parallel robots exhibit superior precision to serial robots. They operate with reduced power consumption due to load distribution among individual motors. However, symmetrical parallel robots employing a 1T2R structure encounter challenges with parasitic movements at the end-effector, leading to control complexities and application limitations. This study aimed to downsize the robot while ensuring its operational range by employing origami techniques. Addressing the inherent weakness of origami’s stiffness, various methods of material stacking and designed joints with diverse materials and thicknesses were proposed to meet specific angle requirements for each component. The developed control model was validated through simulations and experiments, effectively minimizing parasitic movements by verifying the robot"s motion.
The objective of this study was to present a rotary manipulating system driven by a rotary actuator based on twisted shape memory alloy (SMA) wires. The rotary actuator was composed of two oppositely twisted SMA wires connecting a rotor and a stator through a shaft. Two oppositely twisted SMA wires could generate bidirectional rotary motions upon actuation of each twisted SMA wire corresponding to the direction against the twist direction of each SMA wire. A manipulator was designed and fabricated by integrating manipulating arms, the rotary actuator, and a Hall effect magnetic rotary encoder which could measure the angular position of the rotary motion. We modeled and characterized the manipulator upon application of a ramp current input to each twisted SMA wire. A proportional-integral-derivative (PID) controller was designed and implemented to control the proposed rotary manipulator. Reference angular position tracking performances of the manipulator were evaluated with a series of experiments.
Citations
Citations to this article as recorded by
Direct Ink Writing of Tungsten Planar Patterns by Extrusion-based Dispensing System Min-Hyeong Lee, Seung-Hyeon Choi, Jae-Wook Yu, Ji-Su Park, Hyuk-Chun Kwon, Ho-Chang Lee, Seong-Uk Oh, Seung-Gon Choi, In-Gu Choi, Gil-Yong Lee Journal of the Korean Society for Precision Engineering.2026; 43(1): 91. CrossRef
This paper presents a distortion compensation algorithm for cable-driven master devices. Such device has four string pots at four corners of a frame. Four cables are tied from the four corners to the center holder. When the central holder, which is a haptic grip, moves, lengths of the four cables will change. From the four cable lengths, the spatial position of the haptic grip can be estimated using triangulation. In this case, distortion such as barrel image of the image field occurs when estimating a position with an offset parallel to the plane in which the four string pots are located. The closer to the corner, the smaller the position estimate value is than the true value. After distortion phenomenon is modeled by projecting onto the ellipsoid, the position in the vertical direction of the cable plane is compensated by the corresponding value and flattened. The mean error in the x-direction position was improved by 91% from 0.7833±0.8381 mm to -0.0709±0.4341 mm. This cable-driven master device can be used as a haptic device for operating a surgical robot.
Industrial robot manipulators require high absolute position accuracy of the end effector to perform precise and complex tasks. However, manufacturing errors cause differences between nominal and actual parameters, and errors between the expected and actual positions of the end effector, resulting in undesired lower absolute position accuracy. Accordingly, to increase the absolute position accuracy of the end effector, kinematic calibration is required to correct the nominal parameters close to the actual parameters. However, in this study, redundancy of parameters may occur from the overlapping degrees of freedom of parameters in adjacent frames, which causes the problem of unnecessarily correcting many parameters in the optimization process. Thus, to solve this problem and use only the necessary parameters, this paper focuses on the linear relationship of redundant parameters and proposes a method of automatically discriminating and removing it through the Pearson Correlation Analysis. Additionally, through simulations on the two manipulator models, we verify the accuracy of redundancy of parameters determined by the proposed method, and demonstrate consistency and efficiency by comparing the results before and after redundancy removal.
Citations
Citations to this article as recorded by
Development of an Agile Robotic Fixture for Door Trim Fixation Jaesoon Lee, Sang Hyun Park, Jong-Geol Kim, Minseok Kang, Murim Kim Journal of Korea Robotics Society.2025; 20(3): 422. CrossRef
Robot Kinematic Calibration Using a 3D Scanner Won Bo Jang, Junyoung Lee, Jong Hoon Park, Seok Hyeon Yoon, Ui Hun Sagong, Myun Joong Hwang, Murim Kim Journal of Korea Robotics Society.2025; 20(3): 360. CrossRef
Tool-center-point (TCP) calibration and geometric error identification procedures are proposed to improve the accuracy of a 6-axis manipulator with a tilting rotary table. The accuracy of a 6-axis manipulator is affected by the accuracy of TCP calibration. In general, TCP calibration of the 6-axis manipulator uses a conical fixture provided by the manufacturer. However, since a TCP cannot be accurately positioned to the tip of the conical fixture repeatedly, a large positional deviation occurs at the calibration depending on the worker proficiency. Thus, accuracies of TCP calibration and the 6-axis manipulator are reduced. In this paper, a 3-DOF measuring device, consisting of a nest with three dial gauges and a precision ball, is developed to calibrate the TCP and to improve the accuracy of the 6-axis manipulator. Then, geometric errors of a tilting rotary table are identified via double ball-bar measurements according to the ISO 10791-6 with TCP initial alignment using an extension fixture. Finally, proposed TCP calibration and geometric error identification procedures are validated experimentally, and they show improvements in positional accuracy by 55 and 90%, respectively.
Citations
Citations to this article as recorded by
Expanded Position Dilution of Precision-based Optimal Calibration of the Industrial Robot Tool Center Point and Adaptive Three-dimensional Probe Development Seung-Han Yang, Hoon-Hee Lee, Kwang-Il Lee International Journal of Precision Engineering and Manufacturing-Green Technology.2026; 13(3): 1299. CrossRef
In this study, we developed a hydraulic manipulator to assist firefighters and rescue personnel at disaster sites. In the design procedure, we analyzed the manipulator considering the hydraulic actuators as well as the manipulator kinematics and dynamics. For the user interface, a macro/manual operation concept was proposed to provide an effective response in emergency and disaster situations. To cope with abnormalities of the disaster site operator, a protocol for switching local/remote operations was developed. The effectiveness of the hydraulic manipulator and operating system was verified through task implementation experiment.
Citations
Citations to this article as recorded by
An Emergency Cross-Control Method and Integrated Operation System for a Disaster-Safety Robot Jiho Lim, Junyoung Lee, Ju Seong Shin, Sang Hyun Park, Murim Kim Fire Science and Engineering.2025; 39(6): 113. CrossRef
In this paper, we designed and manufactured a new manipulator (less than 15 kg) to make the total weight of SCOBOT-200 (EOD robot: its platform weight is 35 kg) commercialized by FIRSTEC Co., Ltd. Link1 and Link2 of the manipulator were designed and fabricated using CFRP (Carbon Fiber Reinforced Plastics) material, and the other components were made of AL6061 material. The fabricated manipulator has 5-DOF, and the opening width of the gripper is more than 1520 mm. As a result of the characteristic test, the weight of manipulator is 14.5 kg, the length of the manipulator is 1500 mm, the payload when the manipulator extended is 8 kg, when folded is 20 kg. Thus, the manipulator manufactured can be used as a manipulator for a small EOD (Explosive Ordnance Disposal) robot.
Citations
Citations to this article as recorded by
Research on the application of intelligent robots in explosive crime scenes Junwei Guo International Journal of System Assurance Engineering and Management.2023; 14(2): 626. CrossRef
Study on Output Characteristics of Printed Flexible Tactile Sensors Connected to Brass Terminals Jindong Kim, Yonghwan Bae, Inhwan Lee, Hochan Kim Journal of the Korean Society of Manufacturing Process Engineers.2020; 19(4): 65. CrossRef
This paper presents a finite-time tracking control for a robot manipulator in the presence of a modeling uncertainty and an external disturbance. To solve the large chattering phenomenon that is caused by the high switching gain of the slidingmode control, a novel second-order sliding-mode controller that generates a continuous control input is designed with a robust differentiator. The finite-time stability of the closed-loop system is ensured using a constructive Lyapunov-stability analysis. Finally, a numerical simulation of the 2-Axis Pan-Tilt system is performed to verify the effectiveness of the proposed controller.