The demand for flexible electronic materials used in wearable devices has experienced a significant surge in recent years. Wearable devices typically incorporate an electronic material or system that can be mounted on a human body. It is imperative that these materials are composed of substances compatible with the human body. Consequently, numerous studies have been undertaken to develop flexible electronic devices with various performance capabilities. In this study, nanowire patterns were manufactured on nanofibers and utilized as patches. To create a nanowire pattern, a direct-write spraying process was employed to investigate changes in electrical characteristics using process variables. The process involved depositing silver nanowires on the surface of nanofibers using a pneumatic spray nozzle. Generated patterns were found to be suitable for use as sensors capable of withstanding skin-attached deformation.

In this study, soft actuators comprising conductive fibers, flexible polymers, and shape memory alloys, which can be used as textile products, are introduced. Conductive fibers play an important role because they can be used as sensors in wearable devices. The conductive fiber introduced in this study is a form that can be combined with a polymer, and it comprises a form wrapped around a flexible polymer. When an electric current is applied to the shape memory alloy embedded in the polymer, macroscopic deformation occurs due to phase transformation from the Martensite to the Austenite phase. Conductive fibers used in soft actuators are affected by resistive heat generated by the shape memory alloy and bending deformation of the actuator. Accordingly, changes in the conduction properties of conductive fibers were observed due to bending deformation and temperature changes. We also fabricated soft actuators with different types of polymers and observed the differences. The soft actuator presented in this study is a one-piece combination of a conductor and an actuator using a textile-type conductor, and it is likely to be used in smart clothing applications.

Recent developments in additive manufacturing (AM) process have led us to fabricate many mechanical and electrical components or devices into complex geometries. Within existing AM processes, laser is widely used as an energy source to selectively sinter particles with a powder bed fusion (PBF) process or cure photopolymers with a vat photopolymerization (VPP) process. This study investigated the applicability of the SLS process for silver nanoparticles (Ag NPs)-photopolymer inks to fabricate micro-scale conductive patterns. With Ag NPs-photopolymer inks prepared with different mixture ratios and pasted on a polyethylene terephthalate (PET) substrate, a pulse width modulation (PWM) signal-controlled 405 nm laser was applied to these inks to selectively sinter and cure the Ag NPs and the photopolymer simultaneously. The final conductive patterns were obtained after a rinse in ethanol to remove un-sintered and un-cured regions of the inks. Microstructures, thickness profiles, pattern width, electrical resistance, and resistivity of the fabricated patterns were investigated by varying the PWM duty and the laser exposure time. Effects of different numbers of scan lines in the pattern and nanoparticle mixture ratios were also investigated. The proposed method is cost effective and easy with fast patterning capabilities. It will leverage practical advances in AM industries.

Solid oxide fuel cells (SOFCs) are at a technological level close to commercialization, which could be enabled by new material research. Especially, not only an electrolyte, but also a cathode material becomes very important to further increase electrochemical performance, due to the effort to lower operating temperature of SOFCs to intermediate range (400-600℃) to take advantage of high and low temperature operation. Unfortunately, this trend inevitably results in demand for new cathode materials with high oxygen reduction reaction activity, as well as high mechanical durability. Recently, ceramic materials which conduct oxygen ion, proton, and electron, thereby called ‘triple conducting oxide’ are being highlighted, due to their excellent material properties, to be used for cathodes of SOFCs. This paper reviews the three representative triple-conducting oxides, which were already used and tested in SOFC operating conditions.