A hybrid cladding technology was developed by combining direct energy deposition (DED) and ultrasonic nanocrystal surface modification (UNSM). This is an effective process to control the mechanical properties inside the metal-clad layer, but the scope to improve the internal properties is low. Therefore, in this study, the UNSM process was applied while heating at 300 and 600℃ to increase the effectiveness of this hybrid additive process. To validate the characteristics of this method, a study on the cross-sectional properties upon application of heating was conducted. Hybrid cladding at 300 degrees produced improvements- over a 40% larger area than the results at room temperature. At 600 degrees, the hybrid cladding improved mechanical properties over a larger area by nearly 2 times. In this study, the characteristics of the roomtemperature and the high-temperature hybrid cladding process were analyzed. The proposed method shows a high improvement effect and is a promising method to improve the internal mechanical properties of the cladded layer.