This paper introduces an entire development trend of the bio-inspired robots, details of the single locomotive robots, and multimodal robots. Unlike general robots that utilize rigid structures and complex control techniques, creatures have compliant and soft body structures and survive in a simpler way. Inspired by the creatures’ standout performances, bioinspired robotic research has been started by implementing the single locomotion modes of insects such as crawling, jumping, and climbing. Recently, to expand locomotion domain, multimodal robots are actively being studied by integrating more than two locomotion modes of the insects such as jumping-crawling, jumping-gliding, and flying-climbing. Based on the reviews, we carefully suggest how the bio-inspired robotic research will proceed.

This paper presents the design and the control performance of a novel dynamic compliant-arm support with parallel elastic actuators that was developed to assist with the daily living activities of those whose arms are compromised by muscular disease or the aging process. The parallel elastic-arm support consists of a compliant mechanism with combined passive and active components for human interaction and to reach the user’s desired positions. The achievement of these tasks requires impedance control, which can change the virtual stiffness, damping coefficients, and equilibrium points of the system; however, the desired-position tracking by the impedance control is limited when the end-effector weight varies according to the equipping of diverse objects. A prompt algorithm regarding weight calibration and friction compensation is adopted to overcome this problem. A result comparison shows that, by accurately assessing the desired workspace, the proposed algorithm is more effective for the accomplishment of the desired activities.

Recently, there have been many researches about applications of origami to mechanical engineering, which realizes a 3D sturcture by folding a 2D plane material. With this simple manufacturing process, origami was even adopted by some roboticists as a way to build an entirely new robot with benefits in terms of cost, weight, and structural simplicity. In this paper, we propose a new type of a walking robot based on origami structure. Because all the components of the robot that generate gait motion are mechanically connected, it can actually walk forward with only a single actuator. We also showed the similarity of gait trajectories between a kinematic analysis and the actual gait motion measured by video tracking. This result proved the possibility of designing an origami-based robot with the identical gait trajectory as we plan.

In this paper, a hand exoskeleton actuated by air muscles(soft hand exoskeleton) is introduced. Some soft hand exoskeletons have already been developed to overcome the defects of hand exoskeletons based on linkage and pneumatic piston system.they are usually bulky and do not have enough degree of freedom(DOF). However, soft hand exoskeletons still have defects. Their motions are not precise as linkage based hand exoskeletons, because their actuator, such as air muscle is made of soft materials. So we developed a new linkage which is not bulky and has redundant DOF. It is combined with air muscle in a specific way so that it acts as a guide when air muscle is actuated. Some experiments were conducted to evaluate the validity and usability of our hand exoskeleton.

Multi-scale mass-deployable cooperative robots’ is a next generation robotics paradigm where a large number of robots that vary in size cooperate in a hierarchical fashion to collect information in various environments. While this paradigm can exhibit the effective solution for exploration of the wide area consisting of various types of terrain, its technical maturity is still in its infant state and many technical hurdles should be resolved to realize this paradigm. In this paper, we propose to develop new design and manufacturing methodologies for the multi-scale mass-deployable cooperative robots. In doing so, we present various fundamental technologies in four different research fields. (1) Adaptable design methods consist of compliant mechanisms and hierarchical structures which provide robots with a unified way to overcome various and irregular terrains. (2) Soft composite materials realize the compliancy in these structures. (3) Multi-scale integrative manufacturing techniques are convergence of traditional methods for producing various sized robots assembled by such materials. Finally, (4) the control and communication techniques for the massive swarm robot systems enable multiple functionally simple robots to accomplish the complex job by effective job distribution.

Small mobile robots which use round wheels are suitable for driving on a flat surface, but it cannot climb the obstacle whose height is greater than the radius of wheels. As an alternative, legged-wheels have been proposed by many researchers due to its better climbing performance. However, driving and climbing performances have a trade-off relationship so that their driving performance should be sacrificed. In this study, in order to achieve both driving and climbing performances, a new transformable wheel was developed. The developed transformable wheel can have a round shape on a flat surface and change its shape into legged-wheel when it makes a contact with an obstacle. For design of the transformable wheel, the performance of leggedwheel was analyzed with respect to the number and curvature of the leg, and then the new transformable wheel was designed based on the analysis. Contrary to the existing transformable wheels that contain additional actuators for the transformation, the developed transformable wheel can be unfolded without any additional actuator. In this study, in order to validate the transformable wheel, a simple robot platform was fabricated. Consequently, it climbed the obstacle whose height is 2.6 times greater than the wheel radius.

In order to operate a search and rescue robot in hazardous area, the robot requires high mobility and adaptable locomotion for moving in unpredictable environments. In this paper, we propose the deformable soft wheel robot that can produce three kinds of driving modes; caterpillar driving mode, normal wheel driving mode, legged-wheel driving mode. The robot changes its driving mode as it faces the various obstacles such as a small gap, stairs etc. Soft film and composite materials are used for fabrication of deformable wheel structure and Shape Memory Alloy (SMA) coil spring actuators are attached on the structure as an artificial muscle. Film lamination and an composite manufacturing process is introduced and the robot design is required to be modified and compromised to applying the manufacturing process. The prototype is developed and tested for verifying feasibility of the deformable wheel locomotion.