With regard to 3D orientation estimation based on IMMU (Inertial Magnetic Measurement Unit) signals, the yaw estimation accuracy may be significantly degraded as a result of magnetic distortions. Consequently, several yaw estimation Kalman filters (KFs) possessing distortion compensation mechanisms have been proposed. However, majority of the conventional methods fail to effectively curb inaccuracies due to distortion when magnetic fields are extremely distorted. In this paper, we propose a new KF projecting a kinematic constraint to minimize yaw estimation errors induced by magnetic distortions. After the measurement update using magnetometer signals, the proposed method additionally corrects the yaw estimation through projection of a kinematic constraint on a conventional unconstrained KF. Experimental results show that the proposed KF outperformed the conventional KF by approximately 52-67%.
Previous studies on joint angle estimation have been restricted to slow-speed level walking conditions, even though slope walking and running elicit unique biomechanical characteristics. Measurements were mostly based on an optical motion capture system despite in-the-lab limitation of measurement technique. The contribution of this study is twofold: (i) to propose a joint angle estimation method by applying a state-of-the-art parallel Kalman filter based on an inertial measurement unit (IMU) that can overcome in-the-lab limitation, and (ii) to demonstrate its application to level walking condition as well as slope walking and running conditions to fill a gap in joint kinematics literature. In particular, this study focuses on knee flexion/extension and ankle dorsiflexion/plantarflexion angles at various speed variations. The parallel Kalman filter applied in the proposed method can compensate external acceleration through Markov-chain-based acceleration modeling, that may enhance joint estimation performance in high speed walking conditions. To validate the proposed estimation method, an optical motion capture system was used as reference. In addition, patterns for each condition were investigated to identify and evaluate presence of classifying features.
Citations
Citations to this article as recorded by
Evaluating Sparse Inertial Measurement Unit Configurations for Inferring Treadmill Running Motion Mackenzie N. Pitts, Megan R. Ebers, Cristine E. Agresta, Katherine M. Steele Sensors.2025; 25(7): 2105. CrossRef
Consistency Is Key: A Secondary Analysis of Wearable Motion Sensor Accuracy Measuring Knee Angles Across Activities of Daily Living Before and After Knee Arthroplasty Robert C. Marchand, Kelly B. Taylor, Emily C. Kaczynski, Skye Richards, Jayson B. Hutchinson, Shayan Khodabakhsh, Ryan M. Chapman Sensors.2025; 25(13): 3942. CrossRef
달리기 속도에 따른 관성 측정 장비(IMU)의 신뢰도 분석 지혁 강, 재원 강, 석훈 윤 The Korean Journal of Physical Education.2024; 63(5): 493. CrossRef
Comparison of Concurrent and Asynchronous Running Kinematics and Kinetics From Marker-Based and Markerless Motion Capture Under Varying Clothing Conditions Robert M. Kanko, Jereme B. Outerleys, Elise K. Laende, W. Scott Selbie, Kevin J. Deluzio Journal of Applied Biomechanics.2024; 40(2): 129. CrossRef
Development of Gait Measurement System Combined with IMU and Loadcell Insole: A Pilot Study Jeong-Woo Seo, Junggil Kim, Seulgi Lee, Gyerae Tack, Jin-Seung Choi Journal of the Korean Society for Precision Engineering.2022; 39(9): 657. CrossRef
Validity and repeatability of a new inertial measurement unit system for gait analysis on kinematic parameters: Comparison with an optoelectronic system Elodie Piche, Marine Guilbot, Frédéric Chorin, Olivier Guerin, Raphaël Zory, Pauline Gerus Measurement.2022; 198: 111442. CrossRef
Application of Artificial Neural Network for Compensation of Soft Tissue Artifacts in Inertial Sensor-Based Relative Position Estimation Ji Seok Choi, Jung Keun Lee Journal of the Korean Society for Precision Engineering.2022; 39(3): 233. CrossRef
Recreating the Motion Trajectory of a System of Articulated Rigid Bodies on the Basis of Incomplete Measurement Information and Unsupervised Learning Bartłomiej Nalepa, Magdalena Pawlyta, Mateusz Janiak, Agnieszka Szczęsna, Aleksander Gwiazda, Konrad Wojciechowski Sensors.2022; 22(6): 2198. CrossRef
Development of a Low-Cost Open-Source Measurement System for Joint Angle Estimation Túlio Fernandes de Almeida, Edgard Morya, Abner Cardoso Rodrigues, André Felipe Oliveira de Azevedo Dantas Sensors.2021; 21(19): 6477. CrossRef
Drift Reduction in IMU-based Joint Angle Estimation for Dynamic Motion-Involved Sports Applications Jung Keun Lee, Chang June Lee Journal of the Korean Society for Precision Engineering.2020; 37(7): 539. CrossRef
Relative Position Estimation using Kalman Filter Based on Inertial Sensor Signals Considering Soft Tissue Artifacts of Human Body Segments Chang June Lee, Jung Keun Lee JOURNAL OF SENSOR SCIENCE AND TECHNOLOGY.2020; 29(4): 237. CrossRef
Kinematic Constraint-Projected Kalman Filter to Minimize Yaw Estimation Errors Induced by Magnetic Distortions Tae Hyeong Jeon, Jung Keun Lee Journal of the Korean Society for Precision Engineering.2019; 36(7): 659. CrossRef
Three-axis magnetometers are widely used in various fields requiring azimuth information. However, accuracy of azimuth estimation based on magnetometer signals may be degraded because of errors such as offset, scale factor, nonorthogonality, hard-iron distortion, and soft-iron distortion. Recently, several ellipsoid-fitting calibration techniques have been proposed and have received much attention. However, comparative analysis of calibration accuracies between these techniques has not been conducted. This study compared and analyzed performance of four ellipsoid-fitting magnetometer calibration techniques such as the linear least square method, the two-step algorithm, and two different nonlinear least square methods. Our analysis and experimental results reveal superiority of the linear least square method compared to other methods in terms of calibration accuracy as well as ease of use in practice.
Citations
Citations to this article as recorded by
Real-time estimation of roll angles by magnetometer based on two-step adaptive Kalman filter Xiaofen Dong, Guoguang Chen, Xiaoli Tian, Xiaolong Yan Measurement.2022; 198: 111349. CrossRef
Dynamic Accuracy Improvement of a MEMS AHRS for Small UAVs Min-Shik Roh, Beom-Soo Kang International Journal of Precision Engineering and Manufacturing.2018; 19(10): 1457. CrossRef
First
Prev
