In this study, the effects of repetition of assembly and disassembly of polymer electrolyte membrane fuel cells on electrochemical performance were systematically investigated. Additionally, the effects of additional activation on polymer electrolyte membrane fuel cells were evaluated. All fuel cells were measured every three days. For the disassembled polymer electrolyte membrane fuel cells, membrane electrode assemblies were stored in a vacuum desiccator. For the maintained assembly, fuel cells were stored at room temperature. The performance and electrochemical characteristics of the fuel cell were analyzed by electrochemical impedance spectroscopy. As a result, the addition of activation to maintained assembly fuel cells showed the best performance among fuel cells with other assembly and activation conditions. Repetition of assembly and disassembly, as well as insufficient activation, caused degradation of the performance of fuel cells.
Polymer electrolyte membrane fuel cells (PEMFC) require activation to maximize their performance. Thus, an appropriate activation process is essential for the performance of the fuel cell. In this study, the performance of the fuel cell was investigated by changing the voltage range during the activation process. There were three voltage ranges: 0.3-0.9 V, 0.3-0.6 V, and 0.6-0.9 V. When the fuel cell was activated in the low voltage region, the highest performance was output. On the other hand, it showed the lowest performance at high voltage. The results suggest that it is advantageous to activate the fuel cell with a high current. On the other hand, if activation is performed while outputting at a low current, the generation of water and the electrochemical reaction are insufficient, resulting in a load on the fuel cell. Through this experiment, it was confirmed that the control method greatly affects fuel cell performance when activated.
In this study, the electrochemical characteristics of fuel cell were evaluated after applying a compressive load to the activation area of membrane electrode assembly (MEA) in polymer electrolyte membrane fuel cells. The effects of the pressed area under the compressive load were systematically investigated using polarization curves and electrochemical impedance spectroscopies (EIS) of the fuel cell. Interestingly, the performance of the fuel cell was improved as the pressed area of the MEA was increased from 25.2% to 100% of the active area. In addition, the increased pressed area led to a decrease in the ohmic resistance and the activation resistance of fuel cells.
Durability evaluations were conducted using polymer electrolyte membrane fuel cells in a marine environment. Deionised water and 3.5 wt% of NaCl solution were supplied to the cathode using an ultrasonic vibrator. Performance and electrochemical impedance spectroscopy of fuel cells were measured to evaluate the electrochemical behaviors. Additionally, long-term stability evaluations of PEMFCs were carried out at 0.65 V for 20 h. Following the experiments, scanning electron microscope analysis was conducted to confirm the presence of NaCl on membrane electrode assembly and micro porous layer of fuel cells.
Citations
Citations to this article as recorded by
Effects of NaCl Solution on Proton Exchange Membrane Fuel Cell with Serpentine Flow Channel of Different Depths Dong Kun Song, Ho Jun Yoo, Jung Soo Kim, Ki Won Hong, Do Young Jung, George Ilhwan Park, Gu Young Cho Journal of the Korean Society for Precision Engineering.2025; 42(5): 399. CrossRef
Evaluation of Electrochemical Performance of PEMFCs with Decontamination Devices at Marine Environments Ye rim Kwon, Ho Jun Yoo, Byung Gyu Kang, Ki Won Hong, Sun Ki Kwon, Sanghoon Lee, Gu Young Cho Journal of the Korean Society for Precision Engineering.2025; 42(1): 57. CrossRef
A Study of Effects of the Repetition of Assembly and the Addition of Activation on Electrochemical Characteristics of PEMFCs Ji Woong Jeon, Gye Eun Jang, Young Jo Lee, Dong Kun Song, Ho Jun Yoo, Seung Hyeok Hong, Jung Soo Kim, Ye Rim Kwon, Da Hye Geum, Gu Young Cho Journal of the Korean Society for Precision Engineering.2023; 40(11): 867. CrossRef
A Study on Electrochemical Resistance Change through the Pressurization Process of MEA for PEMFC Ye Rim Kwon, Dong Kun Song, Ho Jun Yoo, Gye Eun Jang, Young Jo Lee, Jung Soo Kim, Ji Woong Jeon, Da hae Guem, Gu Young Cho Journal of the Korean Society for Precision Engineering.2023; 40(7): 539. CrossRef
In this study, polymer electrolyte membrane fuel cells (PEMFCs) were humidified with NaCl solutions. NaCl solutions were provided to the cathode side of fuel cells by bubbling. De-Ionized water, 3.5 wt% NaCl solution, and 20 wt% NaCl solution were used to evaluate the effects of NaCl. Current density-voltage curves and electrochemical impedance spectroscopies (EIS) of fuel cells were measured. Additionally, the constant-voltage mode long-term stability of PEMFCs humidified with NaCl solution were investigated. Constant-voltage measurements and EIS results imply that the degradation of fuel cells is clearly related with the concentration of NaCl solutions.
Citations
Citations to this article as recorded by
Effects of NaCl Solution on Proton Exchange Membrane Fuel Cell with Serpentine Flow Channel of Different Depths Dong Kun Song, Ho Jun Yoo, Jung Soo Kim, Ki Won Hong, Do Young Jung, George Ilhwan Park, Gu Young Cho Journal of the Korean Society for Precision Engineering.2025; 42(5): 399. CrossRef
Analysis of Electrochemical Behavior of PEMFC Humidified with NaCl Solution Mist Using an Ultrasonic Vibrator Ho Jun Yoo, Gye Eun Jang, Young Jo Lee, Dong Kun Song, Heeyun Lee, Gu Young Cho Journal of the Korean Society for Precision Engineering.2022; 39(12): 939. CrossRef
In this study, polymer bipolar plates for ultra-light polymer electrolyte membrane fuel cells (PEMFCs) were fabricated. Various methods for current collecting were applied to ensure electron conductivity of the polymer bipolar plates. Direct wire contact and Ag sputter process were applied. The Ag current collecting layer fabricated by the sputter process showed a well-covered and defectless surface. After preparations of bipolar plates, the effects of current collecting methods of bipolar plates on the electrochemical properties of PEMFCs were systematically investigated. The maximum power density of PEMFCs with the Ag current collecting of layered polymer bipolar plates decreased 37.39% because of increased ohmic resistance. However, the power/weight of PEMFCs with the Ag current collecting of layered polymer bipolar plates increased 27.23% because of the dramatically reduced weight (-50.63%) of bipolar plates compared to the graphite bipolar plates. We affirm that results in this report can provide meaningful insight for portable electrochemical energy devices.
Citations
Citations to this article as recorded by
A Study on Electrochemical Resistance Change through the Pressurization Process of MEA for PEMFC Ye Rim Kwon, Dong Kun Song, Ho Jun Yoo, Gye Eun Jang, Young Jo Lee, Jung Soo Kim, Ji Woong Jeon, Da hae Guem, Gu Young Cho Journal of the Korean Society for Precision Engineering.2023; 40(7): 539. CrossRef
First
Prev
