Skip to main navigation Skip to main content
  • E-Submission

JKSPE : Journal of the Korean Society for Precision Engineering

OPEN ACCESS
ABOUT
BROWSE ARTICLES
EDITORIAL POLICIES
FOR CONTRIBUTORS
Article

Gait Pattern Generation for Lower Extremity Exoskeleton Robot and Verification of Energy Efficiency

Wan Soo Kim, Seung Hoon Lee, Jae Kwan Ryu, Joo Hyun Baek, Dong Whan Kim, Jung Soo Han, Chang Soo Han
JKSPE 2012;29(3):346-353.
Published online: March 1, 2012
  • 2 Views
  • 0 Download
  • 0 Crossref
  • 0 Scopus
prev

The purpose of this study is to verify the energy efficiency of the integrated system combining human and a lower extremity exoskeleton robot when it is applied to the proposed gait pattern. Energy efficient gait pattern of the lower limb was proposed through leg function distribution during stance phase and the dynamic-manipulability ellipsoid (DME). To verify the feasibility and effect of the redefined gait trajectory, simulations and experiments were conducted under the conditions of walking on level ground and ascending and descending from a staircase. Experiments to calculate the metabolic cost of the human body with or without the assistance of the exoskeleton were conducted. The energy consumption of the lower extremity exoskeleton was assessed, with the aim of improving the efficiency of the integrated system.

Download Citation

Download a citation file in RIS format that can be imported by all major citation management software, including EndNote, ProCite, RefWorks, and Reference Manager.

Format:

Include:

Gait Pattern Generation for Lower Extremity Exoskeleton Robot and Verification of Energy Efficiency
J. Korean Soc. Precis. Eng.. 2012;29(3):346-353.   Published online March 1, 2012
Download Citation

Download a citation file in RIS format that can be imported by all major citation management software, including EndNote, ProCite, RefWorks, and Reference Manager.

Format:
Include:
Gait Pattern Generation for Lower Extremity Exoskeleton Robot and Verification of Energy Efficiency
J. Korean Soc. Precis. Eng.. 2012;29(3):346-353.   Published online March 1, 2012
Close