Skip to main navigation Skip to main content
  • E-Submission

JKSPE : Journal of the Korean Society for Precision Engineering

OPEN ACCESS
ABOUT
BROWSE ARTICLES
EDITORIAL POLICIES
FOR CONTRIBUTORS
Erratum

Erratum to: 레이저보조가공에서 NURBS 곡면 형상의 예열방법에 대한 연구

Study on the Preheating Method of NURBS Shaped Workpiece by Laser Assisted Machining

Journal of the Korean Society for Precision Engineering 2017;34(3):227-227.
Published online: March 1, 2017

1 창원대학교 기계공학부

1 School of Mechanical Engineering, Changwon National University

cmlee@changwon.ac.kr, Tel: +82-55-213-3622

  • 4 Views
  • 0 Download
prev next
한국정밀공학회지 제33권 제2호 pp. 101-107
출판일자: 2016년 2월 1일
제33권 제2호 101페이지에 표기된 게재판정일자를 아래와 같이 수정합니다.
Table
수정 전 수정 후
Revised: 2015.1.27.
Accepted: 2015.1.28.
Revised: 2016.1.27.
Accepted: 2016.1.28.
J. Korean Soc. Precis. Eng., Vol. 33, No. 2 pp. 101-107
Published online: 1 February, 2016
The acceptance date of the above article has been corrected as follows.
Table
Before correction After correction
Revised: 2015.1.27.
Accepted: 2015.1.28.
Revised: 2016.1.27.
Accepted: 2016.1.28.
The online version of the original can be found underhttps://doi.org/10.7736/KSPE.2016.33.2.101
Choon-Man Lee / #Corresponding Author
School of Mechanical Engineering, Changwon National University,Changwon-si, Gyeongsangnam-do, South Korea

Download Citation

Download a citation file in RIS format that can be imported by all major citation management software, including EndNote, ProCite, RefWorks, and Reference Manager.

Format:

Include:

Study on the Preheating Method of NURBS Shaped Workpiece by Laser Assisted Machining
J. Korean Soc. Precis. Eng.. 2017;34(3):227-227.   Published online March 1, 2017
Download Citation

Download a citation file in RIS format that can be imported by all major citation management software, including EndNote, ProCite, RefWorks, and Reference Manager.

Format:
Include:
Study on the Preheating Method of NURBS Shaped Workpiece by Laser Assisted Machining
J. Korean Soc. Precis. Eng.. 2017;34(3):227-227.   Published online March 1, 2017
Close
Study on the Preheating Method of NURBS Shaped Workpiece by Laser Assisted Machining
Study on the Preheating Method of NURBS Shaped Workpiece by Laser Assisted Machining