Skip to main navigation Skip to main content
  • E-Submission

JKSPE : Journal of the Korean Society for Precision Engineering

OPEN ACCESS
Search
Advanced Search
ABOUT
BROWSE ARTICLES
EDITORIAL POLICIES
FOR CONTRIBUTORS

Articles

Page Path

Erratum

Erratum to: 턴밀에서 트로코이드 치형 가공특성 평가에 관한 연구

이춘만1,✉, 안종욱1

Study on the Evaluation of Machining Characteristics of Trochoidal Profile by Turn-Mill

Choon-Man Lee1,✉, Changwoo Lee1
Journal of the Korean Society for Precision Engineering 2017;34(3):225-225.
Published online: March 1, 2017

1 School of Mechanical Engineering, Changwon National University

1 창원대학교 기계공학부

✉: cmlee@changwon.ac.kr, Tel: +82-55-213-6322

  • 4 Views
  • 0 Download
prev next

Full Article

Download PDF Download PDF
한국정밀공학회지 제33권 제2호 pp. 95-100
출판일자: 2016년 2월 1일
제33권 제2호 95페이지에 표기된 게재판정일자를 아래와 같이 수정합니다.
Table
수정 전 수정 후
Accepted: 2015.1.26. Accepted: 2016.1.26.
J. Korean Soc. Precis. Eng., Vol. 33, No. 2 pp. 95-100
Published online: 1 February, 2016
The acceptance date of the above article has been corrected as follows.
Table
Before correction After correction
Accepted: 2015.1.26. Accepted: 2016.1.26.
The online version of the original can be found underhttps://doi.org/10.7736/KSPE.2016.33.2.95
Choon-Man Lee / #Corresponding Author
School of Mechanical Engineering, Changwon National University,Changwon-si, Gyeongsangnam-do, South Korea

Download Citation

Download a citation file in RIS format that can be imported by all major citation management software, including EndNote, ProCite, RefWorks, and Reference Manager.

Format:

Include:

Study on the Evaluation of Machining Characteristics of Trochoidal Profile by Turn-Mill
J. Korean Soc. Precis. Eng.. 2017;34(3):225-225.   Published online March 1, 2017
DOI: https://doi.org/10.7736/KSPE.2017.34.3.225
Download Citation

Download a citation file in RIS format that can be imported by all major citation management software, including EndNote, ProCite, RefWorks, and Reference Manager.
Format:
Include:
Study on the Evaluation of Machining Characteristics of Trochoidal Profile by Turn-Mill
J. Korean Soc. Precis. Eng.. 2017;34(3):225-225.   Published online March 1, 2017
DOI: https://doi.org/10.7736/KSPE.2017.34.3.225
Close

Related articles

Study on the Evaluation of Machining Characteristics of Trochoidal Profile by Turn-Mill
Study on the Evaluation of Machining Characteristics of Trochoidal Profile by Turn-Mill
JKSPE : Journal of the Korean Society for Precision Engineering

ABOUT

BROWSE ARTICLES

EDITORIAL POLICIES

FOR CONTRIBUTORS

© Korean Society for Precision Engineering.